Search Results: printing metals

Pass Printing Metals, 1963. Hardcover. Good/Acceptable. 1963. 6th Edition. 93 pages. Pictorial dust jacket over burgundy cloth. Contains black and white illustrations. Well bound and clean pages, with mild tanning to text block edges. Previous owner's inscriptions to fep. Boards have mild shelf wear with light rubbing and corner bumping. Some light marking and sunning. Unclipped jacket has light edge wear with minor tears and chipping. Moderate tanning and creasing, with rubbing and marking.

Carlton Press, 1936. Hardcover. Very Good. 1936. Fourth Edition. 94 pages. No dust jacket. Blue cloth. Marbled endpapers. Book is in better condition than most examples of this age. Neat, clean, well bound pages with very minimal foxing, tanning and thumbing. Small inscriptions and neat labels may be present. Boards have mild shelf wear with light rubbing and corner bumping. Some light marking and sunning.

Fry's Metal Foundries , 1936. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. Clean from markings. In poor condition, suitable as a reading copy. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,300grams, ISBN:

Fry's Metal Foundries, Ltd., London, third edition, 1959. Cloth, gilt cover-device, 8vo, 19 cm,. vii, 93, [1] pp, 15 ills. From the introduction "Our book Printing Metals published in 1936 immediately became and has remained the standard work on the subject throughout the world. Nevertheless, much new material has been accumulated in the meantime, principally through our own research work and investigation. Our Technical Director, Mr. R. G. Harper, has now recast the work of his predecessor, Mr. A. H. Mundey, embodying the new material. An attempt has been made to present an outline of the metallurgy of Printing Alloys in the simplest and briefest form which will provide a sufficient understanding of the use of these alloys in a printing works. Fuller consideration of the metallurgy has been made available for the serious student in the appendixes. To those who work with printing metals this is therefore presented as a textbook on one of the most important materials of their trade, in which… Read More

DENMARK: Scandinavian Metal Corporation, 1958. Book is in near very good condition with minor but just noticeable signs of wear and/or age. Owners library plate on inside of front cover.. Second Edition. Paperback. nrVG.

`London: Fry's Metal Foundaries, 1936. 1st Edition 1st Printing. Hardcover. Very Good. 8vo - over 7¾ - 9¾" tall. First edition, first printing octavo hardback brown cloth gilt 100 pp. Illustrated Very good condition. No inscriptions

London: Fry's Metal Foundries Ltd. Publishers orange / brown cloth, titled gilt. . Very Good. Hardcover. 1st Edition. 1936.

Bristol England: Capper Pass & Son Ltd., 1932. 86 pages; index; black and white illustrations of various metal photomicrography sections; this the Third edition, which (from the Preface) "...The Authors have taken the opportunity to increase considerably the scope of the book, and have dealt more fully with the practical application of metals..."; previous owner bookplate of Joan and Michael Higgins New Orleans on front endpaper; bound in dark blue cloth covered boards, silver gilt cover titles; some light edge, tips wear to binding; very good condition and interesting, very specific mid 20th century American printing & publishing industry historical material.. Third Edition. Hard Cover. Very Good.

Paperback / softback. New.

north-holland, 1963 Hardback book in good condition with very good dust jacket. Name stamp on first blank page, tidy underlining in text, and notes in pen on rear end page. 2nd printing, 1963.. Hardcover. Good/Very Good.

Capper Pass & Son Ltd. ; Pass Printing Metals Ltd., 1955. Hardback with dust-wrapper. 93pp. Illus. D/w in fair condition. Book itself in very good condition. Some chipping to d/w, with a couple of very small losses. Previous owner's label to front pastedown. Private ownership. (bs57). Hard Cover. Very Good/Fair.

Mdpi AG, 2019-08-13. Paperback. Very Good. 0.3937 9.5669 6.6929.

London: Fry's Metal Foundries, 1966. 5th or later Edition . Hardcover. Very Good/Good. Owner's name discreetly on inside cover. No other marks to book or cover. Clean, bright pages, tight, even binding. In its original, unclipped dust wrapper which has a fair amount of rubbing to the light areas and a little creasing to the top edges. Still wholly intact and functional, however. Items are dispatched the same or the following working day. Please note our excellent customer feedback.

London, Fry's Metal Foundries Ltd, 1956. 8vo. rev. ed. 181mm x 122mm. Well illustrated, giltstamped cloth. Upper board slightly marked, owner's name on pastedown.. Hardcover .

Capper Pass & Son 1929. First edition, section loose, small octavo, stapled light card covers (VG-); all our specials have minimal description to keep listing them viable. They are at least reading copies, complete and in reasonable condition, but usually secondhand; frequently they are superior examples.Ordering more than one book will reduce your overall postage cost.

Leicester: Raithby, Lawrence & Co, 1912. Second Edition. Hardcover. Good (Boards are edgeworn/scuffed/smudged; textblock edges are lightly toned/scuffed/smudged; interior is lightly toned with occasional scuffing or smudging; small picture with note drawn in pen at the bottom of page 206; inner hinges are cracked.). Green boards with gilt lettering; 1 preliminary leaf, xvi, 172 pp.; richly illustrated.

UsedVeryGood. signs of little wear on the cover.

UsedLikeNew. Remainder mark

New. .

Paperback / softback. New.